Артикул
Каталог |
Наименование |
Описание |
Производитель
№ модели |
4KTY1
Grainger |
 |
Vertical Magnetic Drive Pumps, Immersible w/ Mounting Base, 1/2 HP, Motor Enclosure TEFC, Amps AC 0.81, Housing Polypropylene, Impeller Material Polypropylene, Height 22 In., Dia. 8 3/4 In., NPT Inlet (In.) 1, NPT Outlet (In.) 3/4, GPM of Water @ 5 Ft. of Head 34, GPM of Water @ 15 Ft. of Head 30, Max. Head 40 Ft., Max. Dia. Solids 1/16 In., Max. Liquid Temp. 120 F, For Use With Corrosives |
WARRENDER
MV6.0H1APTT31 |
4KTY4
Grainger |
 |
Vertical Magnetic Drive Pumps, Immersible w/ Mounting Base, 1/2 HP, Motor Enclosure TEFC, Amps AC 3.8, Housing Polypropylene, Impeller Material Polypropylene, Height 21 11/16 In., Dia. 8 3/4 In., NPT Inlet (In.) 1, NPT Outlet (In.) 3/4, GPM of Water @ 5 Ft. of Head 34, GPM of Water @ 15 Ft. of Head 30, Max. Head 40 Ft., Max. Dia. Solids 1/16 In., Max. Liquid Temp. 120 F, For Use With Corrosives |
WARRENDER
MV6.0H1APTT11 |
4KU60
Grainger |
 |
Residential Upright Sump Pump, HP Rating 1/3, 60 Hz, Voltage 115, Amps 4.0, PSC, NEMA 48K Frame, Automatic Thermal Overload Protection, Cord 18/3 x 10 Feet, Maximum Flow 55 GPM, Shut Off 20 Feet, Discharge 1 1/2 and 1 1/4 Inch FNPT, Volute Material Cast Iron, Column Material Steel, Impeller and Shaft Material Stainless Steel, and Float Material Copper, Off Point 5 Inches, On Point 13 To 15 Inches, Column Height 25 Inches, Pump Height 30 1/2 Inches, Diameter 12 Inches, Intermittent Duty Cycle |
DAYTON
4KU60 |
4KU61
Grainger |
|
Non-Submersible Sump Pump, Residential Pedestal, 1/2 HP, Motor Enclosure ODP, Amps AC 5.2, Housing Cast Iron, Impeller Material Stainless Steel, Height (In.) 30-1/2, Dia. (In.) 12, NPT Outlet (In.) 1-1/4, GPM of Water @ 5 Ft. of Head 65, GPM of Water @ 15 Ft. of Head 43, Max. Head (Ft.) 24, Max. Dia. Solids (In.) 0.375 |
DAYTON
4KU61 |
4KU62
Grainger |
 |
Non-Submersible Sump Pump, Residential Pedestal, 1/3 HP, Motor Enclosure ODP, Amps AC 4, Housing Cast Bronze, Impeller Material Stainless Steel, Height (In.) 30-1/2, Dia. (In.) 12, NPT Outlet (In.) 1-1/4, GPM of Water @ 5 Ft. of Head 55, GPM of Water @ 15 Ft. of Head 36, Max. Head (Ft.) 20, Max. Dia. Solids (In.) 0.375 |
DAYTON
4KU62 |
4KU63
Grainger |
|
Non-Submersible Sump Pump, Residential Pedestal, 1/2 HP, Motor Enclosure ODP, Amps AC 5.2, Housing Cast Bronze, Impeller Material Stainless Steel, Height (In.) 30-1/2, Dia. (In.) 12, NPT Outlet (In.) 1-1/4, GPM of Water @ 5 Ft. of Head 65, GPM of Water @ 15 Ft. of Head 43, Max. Head (Ft.) 24, Max. Dia. Solids (In.) 0.375 |
DAYTON
4KU63 |
4KU64
Grainger |
 |
Non-Submersible Sump Pump, Residential Pedestal, 1/3 HP, Motor Enclosure ODP, Amps AC 4, Housing ABS, Impeller Material ABS, Height (In.) 30-1/2, Dia. (In.) 12, NPT Outlet (In.) 1-1/4, GPM of Water @ 5 Ft. of Head 55, GPM of Water @ 15 Ft. of Head 36, Max. Head (Ft.) 20, Max. Dia. Solids (In.) 0.375 |
DAYTON
4KU64 |
4VYD3
Grainger |
 |
Pump, Vertical, 1/20 HP, Motor Enclosure TEFC, Amps AC 1.6, Housing CPVC, Impeller Material CPVC, NPT Inlet (In.) 1/2 F, NPT Outlet (In.) 1/2 M, GPM of Water @ 5 Ft. of Head 10, Max. Head 10 Ft., Max. Dia. Solids 1/16 In., Max. Liquid Temp. 180 F, For Use With Corrosives |
SETHCO
ZDX 1/12CS |
4VYD4
Grainger |
|
Pump, Vertical, 1/20 HP, Motor Enclosure TEFC, Amps AC 1.85, Housing CPVC, Impeller Material CPVC, NPT Inlet (In.) 1/2 F, NPT Outlet (In.) 1/2 M, GPM of Water @ 5 Ft. of Head 10, Max. Head 10 Ft., Max. Dia. Solids 1/16 In., Max. Liquid Temp. 180 F, For Use With Corrosives |
SETHCO
ZDX 1/12CS |
4VYD5
Grainger |
 |
Pump, Vertical, 1/6 HP, Motor Enclosure TEFC, Amps AC 2.8, Housing CPVC, Impeller Material CPVC, NPT Inlet (In.) 3/4 F, NPT Outlet (In.) 1/2 M, GPM of Water @ 15 Ft. of Head 14, Max. Head 21 Ft., Max. Dia. Solids 1/16 In., Max. Liquid Temp. 180 F, For Use With Corrosives |
SETHCO
ZDX 1/3ES |
