ИНДУСТРИАЛЬНЫЙ КАТАЛОГ

Gearmotor, 125rpm, 90vdc

DC Gearmotor, Parallel Shaft, Voltage Rating 90VDC, DC PhaseNameplate RPM 125, Full Load Torque (In.-Lbs.) 100.0, Overhung Load (Lb.) 256, Input HP 1/4, Gear Ratio 23:1, Full Load Amps 2.00TENV Enclosure, None Thermal Protection, All Position Mounting

Артикул:

6ML55

Каталог:

Grainger

Производитель:

DAYTON

Номер модели:

6ML55

Страна производства:

USA

Вес (кг):

8.64

Спецификация:

Item: DC Gearmotor

Type: Parallel Shaft

Voltage Rating: 90VDC

Phase: DC

Shaft Orientation: Parallel

Nameplate RPM: 125

Full Load Torque (In.-Lbs.): 100.0

Overhung Load (Lb.): 256

Input HP: 1/4

Gear Ratio: 23:1

Full Load Amps: 2.00

Enclosure: TENV

Thermal Protection: None

Ambient (C): 40

Rotation: Reversible

Mounting: All Position

Length Less Shaft (In.): 11-5/16

Shaft Dimensions (In.): 3/4 x 1 5/8

Bearings: Heavy Duty Ball, Needle Roller and Thrust Balls on Case, Ball on Motor

Lubrication: Permanent Heavy Fluid Gear Oil

Brushes: Externally Replaceable

Gear Case: Die Cast Aluminum

Gears: Hardened Steel, 1st Stage Helical, Subsequent Stages Spur, AGMA Class 9

Seals: Heavy Duty Industrial

RPM Range: 100 to 150

Артикул Каталог	Описание	Производитель № модели
Необходимая продукция:
1F794 Grainger	Shunt Wound Volts 100 or 200, 1/8 to 2 HP, Voltage Output 90/180VDC, Input Voltage 120/240 VAC, NEMA 4/12 Enclosure, Speed Range 50:1, Speed Regulation +/- 1 Percent of Motor Base Speed, Current/Torque Limit Adjustable, Accepts Tach Feedback Yes, Dynamic Braking Yes, Linear Acceleration Fixed, Linear Deceleration No, Fixed Deceleration (Sec.) 1/2, Power On Light Yes, Protection Type Fused, IR Compensation Adj., Mount Type Wall Mount, Height (In.) 9.50, Depth (In.) 5.50, Width (In.) 5.00	DAYTON 1F794
2M171 Grainger	Shunt Wound Volts 100 or 200, 1/8 to 2 HP, Voltage Output 90 or 180 VDC, Input Voltage 120/240 VAC, NEMA 4/12 Enclosure, Speed Range 50:1, Speed Regulation +/- 1 Percent of Motor Base Speed, Current/Torque Limit Adjustable, Accepts Tach Feedback Yes, Dynamic Braking Yes, Linear Acceleration Fixed, Linear Deceleration No, Fixed Deceleration (Sec.) 1/2, Power On Light Yes, Protection Type Fused, IR Compensation Adj., Mount Type Wall Mount, Height (In.) 9.50, Depth (In.) 5.50, Width (In.) 5.00	DAYTON 2M171
2M510 Grainger	Variable DC Speed Control, Analog, Output Voltage 90/180 VDC, Shunt Wound Voltage 100/200 VDC, Power Rating @ Lower Voltage 1/8-1/2 HP, @ Higher Voltage 1/4-1 HP, Input Voltage 120/240 VAC, Speed Range 50:1, Maximum Current 5.0 Amps, Dynamic Braking Capability, Chassis Mount, Acceleration Fixed @ 6 Seconds, Deceleration Fixed, Adjustable Torque Limit, Current Limit, Minimum/Maximum Speed, IR Compensation, Accepts Tach Feedback, Length 4.25 Inches, Depth 1.30 Inches, Width 3.63 Inches	DART CONTROLS 125DV-C-K
2M511 Grainger	Variable DC Speed Control, Output Voltage 90 VDC, Shunt Wound Voltage 100 VDC, Power Rating 1/8-1 HP, Input Voltage 120 VAC, Speed Range 50:1, Maximum Current 10.0 Amps, Enclosure NEMA 4/12, Adjustable Acceleration, Deceleration, Torque Limit, Current Limit, Minimum/Maximum Speed, IR Compensation, Dynamic Braking, Accepts Tach Feedback, Additional Switches On/Off, Forward/Reverse, Fuse Protected, Length 10.00 Inches, Depth 4.75 Inches, Width 6.70 Inches	DART CONTROLS 530BRE-36MA
4Z829 Grainger	Shunt Wound Volts 100/200 VDC, 1/8 to 2 HP, Voltage Output 90/180 VDC, Input Voltage 120/240 VAC, NEMA 4/12 Enclosure, Speed Range 50:1, Speed Regulation +/- 1 Percent Motor Base Speed, Current/Torque Limit Adjustable, Accepts Tach Feedback Yes, Dynamic Braking Yes, Linear Acceleration Fixed, Linear Deceleration No, Fixed Deceleration (Sec.) 1/2, Power On Light Yes, Protection Type Fused, IR Compensation Adj., Mount Type Wall Mount, Height (In.) 9-1/2, Depth (In.) 5-1/2, Width (In.) 5	DAYTON 4Z829

Артикул Каталог	Описание	Производитель № модели
Дополнительные аксессуары:
6XF02 Grainger	DC Gearmotor Conduit Box Kit	DAYTON 6XF02
6XF03 Grainger	L Shaped Gearmotor Mounting Bracket, AC/DC	DAYTON 6XF03

Обратите внимание:

5CJC1
DC Gearmotor, 90VDC, RPM167, Parallel Shaft

5NUA9
AC Gearmotor, Inline, RPM 51

7C545
DC Gearmotor, Parallel, 24V, 25 rpm, 1/30 HP

7CD73
AC Gearmotor, Parallel, 115V, 9 rpm, 1/19 HP