2YDZ5 2YDZ5
DAYTON
Chain, Roller
304 Stainless Steel Corrosion Resistant Roller Chain, ANSI Chain Size 40SS, Pitch 1/2 Inches, Maximum Allowable Load 100 Pounds, Rivet End to Center Line (L2) 0.392 Inches, Connecting End to Center Line 0.325 Inches, Diameter 0.312 Inches, Overall Width (L1+L2) 0.717 Inches, Width 5/16 Inches, 10 Feet Length, Single
Артикул:
6L076
Каталог:
Grainger
Производитель:
TSUBAKI
Номер модели:
40SS
Страна производства:
Japan
Вес (кг):
2.02
Спецификация:
| Item: Roller Chain |
| Type: Corrosion Resistant |
| ANSI Chain Size: 40SS |
| Pitch (In.): 1/2 |
| Roller Dia. (In.): 0.312 |
| Width Between Roller Link Plates (In.): 0.312 |
| Overall Width (In.): 0.717 |
| Rivet End to Center Line (In.): 0.325 |
| Connecting End to Center Line (In.): 0.392 |
| Max. Allowable Load (Lb.): 100 |
| Length (Ft.): 10 |
| Temp. Range: -270 to 750F |
| Material: Stainless Steel |
| Дополнительные аксессуары: | ||||
Артикул Каталог |
Наименование |
Описание | Производитель № модели |
|
|---|---|---|---|---|
| 1A911 Grainger |
 |
Chain Detacher, For Use With Roller Chain, ANSI Type 25-60 | TSUBAKI D-35 |
|
| 2F139 Grainger |
 |
Chain and Wire Lubricant, Type Synthetic, Size 16 oz, Size/Net Weight 10 oz, Temp Range Up to 350 F, Flash Point Less Than 0 F, VOC Content 608 g/L, Specific Gravity 0.6843, Film Type Non Drying, Hydrocarbon Propellant, Contains Organo Molybdenum, Resists Water Wash off and Sling-off, Penetrates Deep and Leaves a Tough Film that Lubricates and Protects, Extends the Working Life of Chains and Wire Rope and Reduces Wear Caused by Friction and Corrosion, Petroleum Base | CRC 03050 |
|
| 6L085 Grainger |
 |
Individual Offset Chain Link, ANSI Chain Size 40SS, For Corrosion Resistant Roller Chain, Package 5 | TSUBAKI 40SS O/L |
|
| 6L094 Grainger |
 |
Individual Roller Chain Connecting Link, ANSI Chain Size 40SS, For 304 Stainless Steel Corrosion Resistant, Package 5 | TSUBAKI 40SS C/L |
|
Альтернативная продукция:
Roller Chain, Corrosion Resistant, ANSI Chain Size 40SS, Pitch 0.500 In, Rivet End to Center Line 0.320 In, Connecting End to Center Line 0.375 In, Hole Dia. 0.155 In, Bushing Dia. 0.22 In, Tensile Strength 2750 Lb., Max. Allowable Load 100 Lb., Breaking Strength 2750 Lb., Length 10 Ft., Temp. Range -20F-550F, 304 Stainless Material