ТЕЛ:+7 (985) 487-07-35
INFO@ROS-MASTER.RU
ИНДУСТРИАЛЬНЫЙ КАТАЛОГ

Pump, Pressure Booster, 1 1/2 HP

Pressure Booster Pump, High-Volume, ODP, Housing Material Cast Iron, 1-1/2 HP, 1 Phase, Voltage 115/230, 21/10.5 Amps, 60 Hz, Inlet 1-1/2 In NPT, Outlet 1-1/4 In NPT, Max. Pressure 44 psi, Suction Lift 25 Ft., Max. Case Pressure 100 psi, 3450 RPM, Motor Type Permanent Split Capacitor, Continuous Duty, Closed, Brass Impeller, Seal Material Stainless Steel, Buna, Carbon/Silicon Carbide, Max. Liquid Temp. 200F, Max. Fluid Viscosity 31 SSU, CSA, CUS, UL Listed, Includes Manual
Артикул:
5UXH4
Каталог:
Grainger
Производитель:
DAYTON
Номер модели:
5UXH4
Страна производства:
China
Вес (кг):
24.89
5UXH4 Pump, Pressure Booster, 1 1/2 HP
Спецификация:
Item: Pressure Booster Pump
Type: High-Volume
Motor Enclosure: ODP
Housing Material: Cast Iron
HP: 1-1/2
Phase: 1
Voltage: 115/230
Amps: 21/10.5
Hz: 60
Inlet (In.): 1-1/2 NPT
Outlet (In.): 1-1/4 NPT
GPM @ 20 PSI: 75
GPM @ 25 PSI: 70
GPM @ 30 PSI: 61
GPM @ 35 PSI: 47
GPM @ 40 PSI: 36
Max. Pressure (PSI): 44
Suction Lift (Ft.): 25
Max. Case Pressure (PSI): 100
Max. PSI Boost @ 2-10 GPM: 43
Max. PSI Boost @ 20 GPM: 42
Max. PSI Boost @ 30 GPM: 41
Max. GPM @ PSI: 75 @ 20
Best Efficiency GPM @ PSI: 51 @ 35
Min. GPM @ PSI: 36 @ 40
Pressure Range (PSI): 0 to 44
Best Efficiency GPM @ Head (Ft.): 51 @ 80
Best Efficiency Range GPM @ Head (Ft.): 68-36 GPM @ 61-92 Ft
Motor RPM: 3450
Motor Type: Permanent Split Capacitor
Duty: Continuous Duty
Wetted Materials: Brass, Cast Iron, Stainless Steel, Buna N, Carbon, Ceramic
Impeller Material: Brass
Impeller Type: Closed
Diffuser Material: Cast Iron
Seal Material: Stainless Steel, Buna, Carbon/Silicon Carbide
Seal Type: Mechanical
Shaft Material: Stainless Steel
Seal Application: Clear Water Below 200 PSI
Bearing Type: Permanently Lubricated Ball
Max. Liquid Temp. (F): 200
Min. Inlet Flow Required: 2 GPM
Max. Inlet Pressure (PSI): 56
Stages: 1
Max. Fluid Viscosity: 31 SSU
Plug or Connector Type: Direct Wire
Length (In.): 15-1/8
Width (In.): 8-1/4
Height (In.): 9-1/4
Motor Ambient Temp. Rating: 149 Degrees F
Service Factor: 1.3
Max. Working Pressure (PSI): 100
NEMA/IEC Frame: 56J
For Use With: Nonflammable Liquids Compatible with Pump Component Materials
Application: Pressure Boosting, Pressure Cleaning, Spray or Mist Systems, Reverse Osmosis, Water Circulation
Agency Compliance: CSA, CUS, UL Listed
Manufacturers Warranty Length: 1 Year
Includes: Manual
Альтернативная продукция:
22W744  CJ103151
FLINT & WALLING
Booster Pump, ODP, 1-1/2 HP, 1 Phase, Voltage 115/230, Amps 21/10.5, 60 Hz, Stages 1, Inlet (In.) 1-1/2 FNPT, Outlet (In.) 1-1/4 FNPT, Max. Pressure 43 PSI, Suction Lift 25 Ft., Max. Liquid Temp. 200 Degrees F, Closed Impeller, Mechanical Seal, Length 15-1/8 In., Width 8-1/4 In., Height 3-5/16 In.