4JPD9
Turbine Pump, 3/4 HP, 1 Ph, 10.7/5.3 Amp
Turbine Pump, 3 HP, 1 Ph, 12.5 Amp
Turbine Pump, Close Coupled, 3 HP, 1 Phase, Voltage 230, 12.5 Amps, 60 Hz, Inlet 1 1/4 In., Outlet 1 In., Max. Pressure 300 PSI, Length 17 1/8 In., Height 8 1/8 In., Width 8 13/16 In.
Артикул:
4JPG3
Каталог:
Grainger
Производитель:
DAYTON
Номер модели:
4JPG3
Страна производства:
India
Вес (кг):
34.55
Спецификация:
| Item: Turbine pump |
| Type: Centrifugal |
| HP: 2 |
| Phase: 1 |
| Voltage: 230 |
| Amps: 12.5 |
| Hz: 60 |
| Inlet (In.): 1-1/4 |
| Outlet (In.): 1 |
| Motor Enclosure: TEFC |
| NEMA/IEC Frame: 56J |
| Motor RPM: 3450 |
| Motor Type: Capacitor-Start, Capacitor-Run |
| Service Factor: 1.0 |
| Wetted Materials: Bronze, Cast Iron,Buna-N, Carbon, Ceramic and 316 Stainless Steel |
| Impeller Material: Bronze |
| Housing Material: Cast Iron with nickel plating |
| Volute Material: Cast Iron with Nickel Plating |
| Shaft Material: 304 Stainless Steel |
| Shaft Size (In.): 5/8" |
| Screw Material: Zinc Plated |
| Seal Type: Mechanical Seal |
| Seal Material: Buna-N with Carbon and Ceramic Faces & 316 Stainless Steel Spring |
| Seal Application: Long Life When Not Run Dry or Pumping Abrasives |
| Max. Liquid Temp. (F): -20 to 230 Degrees F |
| GPM @ 10 PSI: 18.4 |
| GPM @ 20 PSI: 17.8 |
| GPM @ 30 PSI: 17.2 |
| GPM @ 40 PSI: 16.6 |
| GPM @ 50 PSI: 16 |
| GPM @ 60 PSI: 15.3 |
| GPM @ 75 PSI: 14.4 |
| GPM @ 80 PSI: 14 |
| GPM @ 100 PSI: 12.6 |
| GPM of Water @ 120 PSI: 11 |
| Max. Pressure (PSI): 140 |
| Best Efficiency GPM @ Head (Ft.): 14.0 @ 80 |
| Best Efficiency Range GPM @ Head (Ft.): 50 - 100 @ 16.0 - 12.6 |
| Max. Specific Gravity: 1 |
| Max. Case Pressure (PSI): 200 |
| Max. Fluid Viscosity: 100 SSU |
| Inlet Pressure (PSI): 100 |
| Impeller Type: Open |
| Bearing Type: Ball |
| Duty: Continuous |
| Drain Plug: Easily Accessible at Bottom |
| Agency Compliance: Motor is UL Recognized |
| Application: For boiler feed and condensate return service, low flow, pumping clean fluids, non flamable liquids compatable with pump component materials. |
| Length (In.): 17.16 |
| Height (In.): 8.1 |
| Width (In.): 8.8 |
| Construction: Bronze impeller, Buna-N O-ring gaskets, mechanical seal with Buna-N and stainless steel parts and carbon / ceramic seats, cast iron cover and motor bracket with hard electroless nickel plating and replacable bronze shaft sleeve. |
| Includes: OIPM |
