ТЕЛ:+7 (985) 487-07-35
INFO@ROS-MASTER.RU
ИНДУСТРИАЛЬНЫЙ КАТАЛОГ

Turbine Pump, 3/4 HP, 3 Ph, 2.4/1.2 Amp

Turbine Pump, Close Coupled, 3/4 HP, 3 Phase, Voltage 208-230/460, 2.5-2.4/1.2 Amps, 60 Hz, Inlet 1 In., Outlet 1 In., Max. Pressure 120 PSI, Length 14 5/16 In., Height 6 5/16 In., Width 7 7/8 In.
Артикул:
4JPE1
Каталог:
Grainger
Производитель:
DAYTON
Номер модели:
4JPE1
Страна производства:
India
Вес (кг):
19.24
4JPE1 Turbine Pump, 3/4 HP, 3 Ph, 2.4/1.2 Amp
Спецификация:
Item: Turbine pump
Type: Centrifugal
HP: 3/4
Phase: 3
Voltage: 208-230/460
Amps: 2.5-2.4/1.2
Hz: 60
Inlet (In.): 1
Outlet (In.): 1
Motor Enclosure: TEFC
NEMA/IEC Frame: 56J
Motor RPM: 3450
Motor Type: 3 Phase
Service Factor: 1.15
Wetted Materials: Bronze, Buna-N, Carbon, Ceramic and 316 Stainless Steel
Impeller Material: Bronze
Housing Material: Bronze
Volute Material: Bronze
Shaft Material: 304 Stainless Steel
Shaft Size (In.): 5/8"
Screw Material: SS
Seal Type: Mechanical Seal
Seal Material: Buna-N with Carbon and Ceramic Faces & 316 Stainless Steel Spring
Seal Application: Long Life When Not Run Dry or Pumping Abrasives
Max. Liquid Temp. (F): -20 to 230 Degrees F
GPM @ 10 PSI: 5.5
GPM @ 20 PSI: 4.9
GPM @ 30 PSI: 4.4
GPM @ 40 PSI: 3.8
GPM @ 50 PSI: 3.4
GPM @ 60 PSI: 2.8
GPM @ 75 PSI: 2.2
GPM @ 80 PSI: 1.9
GPM @ 100 PSI: 1
GPM of Water @ 120 PSI: 0.4
Max. Pressure (PSI): 120
Best Efficiency GPM @ Head (Ft.): 2.8 @ 60
Best Efficiency Range GPM @ Head (Ft.): 35 - 75 @ 4.1 - 2.2
Max. Specific Gravity: 1
Max. Case Pressure (PSI): 200
Max. Fluid Viscosity: 100 SSU
Inlet Pressure (PSI): 60
Impeller Type: Open
Bearing Type: Ball
Duty: Continuous
Drain Plug: Easily Accessible at Bottom
Agency Compliance: Motor is UL Recognized
Application: For boiler feed and condensate return service, low flow, pumping clean fluids, non flamable liquids compatable with pump component materials.
Length (In.): 14.3
Height (In.): 6.3
Width (In.): 7.9
Construction: Bronze impeller, Buna-N O-ring gaskets, mechanical seal with Buna-N and stainless steel parts and carbon / ceramic seats, cast iron cover and motor bracket with hard electroless nickel plating and replacable bronze shaft sleeve.
Includes: OIPM
Альтернативная продукция:
4JPD8  4JPD8
DAYTON
Turbine Pump, Close Coupled, 3/4 HP, 3 Phase, Voltage 208-230/460, 2.7-2.5/1.2 Amps, 60 Hz, Inlet 1 In., Outlet 1 In., Max. Pressure 120 PSI, Length 14 3/4 In., Height 6 5/16 In., Width 6 1/2 In.