2ZXK8 2ZXK8
DAYTON
Centrifugal Pump, 1 HP, 1 Ph, 115/230V
Centrifugal Pump, High Head, Housing Material Bronze, 1 HP, 1 Phase, Voltage 115/230, Amps 14.4/7.2, 60 Hz, Inlet 1 1/4 In., Outlet 1 In., Motor Enclosure ODP, Service Factor 1.4, Impeller Type Closed, Impeller Material 316 Stainless Steel, Seal Material Viton, Max. Head 112 Ft., Length 13 3/4 In., Width 10 In., Height 8 1/2 In.
Артикул:
2ZXA1
Каталог:
Grainger
Производитель:
DAYTON
Номер модели:
2ZXA1
Страна производства:
India
Вес (кг):
23.41
Спецификация:
| Item: Centrifugal Pump |
| Type: High Head |
| Housing Material: Bronze |
| HP: 1 |
| Phase: 1 |
| Voltage: 115/230 |
| Amps: 14.4/7.2 |
| Hz: 60 |
| Inlet (In.): 1-1/4 |
| Outlet (In.): 1 |
| Motor Enclosure: ODP |
| NEMA/IEC Frame: 56J |
| Motor RPM: 3450 |
| Motor Type: ODP |
| Service Factor: 1.4 |
| Impeller Type: Closed |
| Impeller Material: 316 Stainless Steel |
| Volute Material: Bronze |
| Shaft Material: 303 Stainless Steel |
| Screw Material: Stainless Steel |
| Seal Type: Mechanical Carbon on Ceramic |
| Seal Material: Viton |
| Seal Application: Long life When Not Run Dry or Pumping Abrasives |
| Max. Liquid Temp. (F): 200 |
| GPM of Water @ 10 Ft. of Head: 59 |
| GPM of Water @ 15 Ft. of Head: 57 |
| GPM of Water @ 20 Ft. of Head: 55 |
| GPM of Water @ 25 Ft. of Head: 53 |
| GPM of Water @ 30 Ft. of Head: 51 |
| GPM of Water @ 40 Ft. of Head: 47 |
| GPM of Water @ 50 Ft. of Head: 43 |
| GPM of Water @ 60 Ft. of Head: 38 |
| GPM of Water @ 70 Ft. of Head: 34 |
| GPM of Water @ 80 Ft. of Head: 28 |
| GPM of Water @ 90 Ft. of Head: 23 |
| GPM of Water @ 100 Ft. of Head: 13 |
| GPM of Water @ 110 Ft. of Head: 3 |
| Max. Head (Ft.): 112 |
| Min. GPM @ Head (Ft.): 3 @ 110 |
| Max. GPM @ Head (Ft.): 59 @ 10 |
| Best Efficiency GPM @ Head (Ft.): 34 @ 70 |
| Best Efficiency Range GPM @ Head (Ft.): 23-48 @ 90-40 Ft. |
| Max. Specific Gravity: 1.0 |
| Wetted Materials: Bronze, Brass, Viton, Carbon, Ceramic, 316 SS |
| Max. Case Pressure (PSI): 200 |
| Max. Fluid Viscosity: 100 SSU |
| Inlet Pressure (PSI): 200 |
| Bearing Type: Ball |
| Duty: Continuous |
| Port Rotation: 4 Position Increments |
| Drain Plug: Easily Accessible |
| Manufacturers Warranty Length: 1 Year |
| Application: Rugged Close-Coupled Pumps Continuously Produce High Head Condition |
| For Use With: Nonflammable and Nonabrasive Liquids |
| Length (In.): 13-3/4 |
| Width (In.): 10 |
| Height (In.): 8-1/2 |
| Includes: Manual |
Альтернативная продукция:
Centrifugal Pump, High Head, Housing Material Stainless Steel, 1 HP, 1 Phase, Voltage 115/230, Amps 14.4/7.2, 60 Hz, Inlet 1 1/4 In., Outlet 1 In., Motor Enclosure ODP, Service Factor 1.4, Impeller Type Closed, Impeller Material Stainless Steel, Seal Material Viton, Max. Head 112 Ft., Length 15 3/4 In., Width 10 In., Height 8 1/2 In.