ИНДУСТРИАЛЬНЫЙ КАТАЛОГ

Pedestal Pump, Centrifugal, HP Req. 1 1/2

Pedestal Pump, Centrifugal, HP Required 1 1/2, Inlet 1 1/2 In., Outlet 1 1/4 In., Impeller Material Cast Iron, Housing Material Cast Iron, Seal Material Buna-N, Max. Head 67 Ft., Max. Pressure 29 PSI, Inlet Pressure 200 PSI, Impeller Type Semi Open, Height 6 3/4 In., Length 6 3/4 In., Width 7 1/4 In.

Артикул:

2ZWX7

Каталог:

Grainger

Производитель:

DAYTON

Номер модели:

2ZWX7

Страна производства:

India

Вес (кг):

7.10

2ZWX7 Pedestal Pump, Centrifugal, HP Req. 1 1/2

Спецификация:

Item: Pedestal Pump

Type: Centrifugal

HP Required: 1-1/2

Inlet (In.): 1-1/2

Outlet (In.): 1-1/4

Wetted Materials: Cast Iron, Buna-N, Carbon, Ceramic, SS

Impeller Material: Cast-Iron

Housing Material: Cast Iron

Volute Material: Cast Iron

Shaft Material: Stainless Steel

Screw Material: Zinc Plated

Seal Type: Mechanical Carbon on Ceramic

Seal Material: Buna-N

Seal Application: Long Life When Not Run Dry or Pumping Abrasives

Max. Liquid Temp. (F): 200

GPM of Water @ 10 Ft. of Head: 115

GPM of Water @ 15 Ft. of Head: 110

GPM of Water @ 20 Ft. of Head: 104

GPM of Water @ 30 Ft. of Head: 94

GPM of Water @ 40 Ft. of Head: 81

GPM of Water @ 50 Ft. of Head: 64

GPM of Water @ 60 Ft. of Head: 40

Max. Head (Ft.): 67

Max. Pressure (PSI): 29

Best Efficiency GPM @ Head (Ft.): 72 @ 44

Best Efficiency Range GPM @ Head (Ft.): 55-99 @ 55-25 Ft.

Max. Specific Gravity: 1.0

Max. Case Pressure (PSI): 200

Max. Fluid Viscosity: 100 SSU

Inlet Pressure (PSI): 200

Impeller Type: Semi Open

Bearing Type: Ball

Duty: Continuous

Port Rotation: 4 Position

Drain Plug: Easily Accessible

Manufacturers Warranty Length: 1 Year

Application: High Flow at Low Head Pressure

For Use With: Nonflammable and Nonabrasive Liquids

Height (In.): 6-3/4

Length (In.): 6-3/4

Width (In.): 7-1/4

Includes: Complete Pump with Mounting Base. No Motor or Drive Couplers. Includes Manual

Артикул Каталог	Описание	Производитель № модели
Дополнительные аксессуары:
3ACE6 Grainger	Replacement Pump Shaft Seal, Shaft Size 5/8 In, Seal Bore 5/8 In, Nominal Working Length (In) 1, Seat Bore 1 1/4 In, Seat Thickness 0.405, Material Content Code BCRJR, Seal Material Buna, Carbon, Ceramic, Max Temp 160 F, Min Temp Rating -25 Deg F	DAYTON 3ACE6
3ACE7 Grainger	Replacement Pump Shaft Seal, Shaft Size 5/8 In, Seal Bore 5/8 In, Nominal Working Length (In) 1, Seat Bore 1 1/4 In, Seat Thickness 0.405, Material Content Code VCRJR, Seal Material Viton, Carbon, Ceramic, Max Temp 250 F, Min Temp Rating 40 Deg F	DAYTON 3ACE7
3ACE8 Grainger	Replacement Pump Shaft Seal, Shaft Size 5/8 In, Seal Bore 5/8 In, Nominal Working Length (In) 1, Seat Bore 1 1/4 In, Seat Thickness 0.405, Material Content Code VXRXR, Seal Material Viton, Silicon Carbide, Max Temp 250 F, Min Temp Rating 40 Deg F	DAYTON 3ACE8

Альтернативная продукция:

2ZWP7 - Pump, Centrifugal, 1 1/2 HP, 1 Ph, 115/230V Подробнее...

2ZWP7 2ZWP7
DAYTON

Pump, Centrifugal, 1 1/2 HP, 1 Phase, Voltage 115/230, 13.5/6.4 Amps, Inlet 1 1/2 In., Outlet 1 1/4 In., Motor Enclosure ODP, Housing Material Cast Iron, Impeller Type Semi Open Non-Clogging, Impeller Material Cast-Iron, Max. Head 67 Ft., Seal Type Mechanical, Length 15 In., Width 7 1/8 In., Height 6 In., 3450 Motor RPM, 60 Hz, Service Factor 1.3, Inlet Pressure 200 PSI