2ZWZ4 2ZWZ4
DAYTON
Pump, Centrifugal, 2 HP, 3 Ph, 230/460V
Pump, Centrifugal, 2 HP, 3 Phase, Voltage 230/460, 5.8/2.9 Amps, Inlet 1 1/2 In., Outlet 1 1/4 In., Motor Enclosure TEFC, Housing Material Stainless Steel, Impeller Type Semi Open Non-Clogging, Impeller Material Stainless Steel, Max. Head 72 Ft., Seal Type Mechanical, Length 14 13/16 In., Width 7 5/8 In., Height 7 In., 3450 Motor RPM, 60 Hz, Service Factor 1.2, Inlet Pressure 219 PSI
Артикул:
2ZWU9
Каталог:
Grainger
Производитель:
DAYTON
Номер модели:
2ZWU9
Страна производства:
India
Вес (кг):
23.16
Спецификация:
| Item: Pump |
| Type: Centrifugal |
| HP: 2 |
| Phase: 3 |
| Voltage: 230/460 |
| Amps: 5.8/2.9 |
| Inlet (In.): 1-1/2 |
| Outlet (In.): 1-1/4 |
| Motor Enclosure: TEFC |
| Housing Material: Stainless Steel |
| Impeller Type: Semi Open Non-Clogging |
| Impeller Material: Stainless Steel |
| Max. GPM @ Head (Ft.): 122 @ 10 |
| Best Efficiency GPM @ Head (Ft.): 70 @ 52 |
| Min. GPM @ Head (Ft.): 10 @ 70 |
| Max. Head (Ft.): 72 |
| GPM of Water @ 10 Ft. of Head: 122 |
| GPM of Water @ 15 Ft. of Head: 115 |
| Seal Type: Mechanical |
| Seal Material: Viton, Carbon, Ceramic, SS |
| Length (In.): 14-13/16 |
| Width (In.): 7-5/8 |
| Height (In.): 7 |
| NEMA/IEC Frame: 56J |
| Motor RPM: 3450 |
| Hz: 60 |
| Service Factor: 1.2 |
| Wetted Materials: SS, Viton, Carbon, Ceramic |
| Volute Material: Stainless Steel |
| Shaft Material: Stainless Steel |
| Shaft Size (In.): 5/8 |
| Screw Material: Stainless Steel |
| Seal Application: Long life When not Run Dry or Pumping Abrasives |
| Max. Liquid Temp. (F): 200 |
| GPM of Water @ 20 Ft. of Head: 109 |
| GPM of Water @ 25 Ft. of Head: 103 |
| GPM of Water @ 30 Ft. of Head: 98 |
| GPM of Water @ 40 Ft. of Head: 84 |
| GPM of Water @ 50 Ft. of Head: 68 |
| GPM of Water @ 60 Ft. of Head: 46 |
| GPM of Water @ 70 Ft. of Head: 10 |
| Best Efficiency Range GPM @ Head (Ft.): 50-95 @ 65-30 Ft. |
| Max. Specific Gravity: 1.0 |
| Max. Case Pressure (PSI): 200 |
| Max. Fluid Viscosity: 100 SSU |
| Inlet Pressure (PSI): 219 |
| Bearing Type: Ball |
| Max. Pressure (PSI): 31.2 |
| Duty: Continuous |
| Port Rotation: 4 Position |
| Drain Plug: Side and bottom |
| Manufacturers Warranty Length: 1 Year |
| Application: High Flow at Low Head Pressure |
| For Use With: Nonflammable and Nonabrasive Liquids |
| Includes: Manual |
Альтернативная продукция:
Pedestal Pump, Centrifugal, HP Required 2, Inlet 1 1/2 In., Outlet 1 1/4 In., Impeller Material SS, Housing Material SS, Seal Material Viton, Max. Head 72 Ft., Max. Pressure 31.2 PSI, Inlet Pressure 200 PSI, Impeller Type Semi Open, Height 7 1/4 In., Length 7 3/4 In., Width 7 1/2 In.