ИНДУСТРИАЛЬНЫЙ КАТАЛОГ

Support Rail, Steel, .625 In D, 48 In

Linear Shaft Support Rail, Low, Pre-Drilled, Mounting Hole from Shaft End 2 In, Mounting Hole Center to Center 4 In, Mounting Hole Size 0.19, #8-32 Bolt Size, Length 48 In, Base Width 0.450 In, Steel Material, For Use With Thomson 60Case shafting And Linear Bearings

Артикул:

2RDH8

Каталог:

Grainger

Производитель:

THOMSON

Номер модели:

LSR-10-PD

Страна производства:

Not Available

Вес (кг):

2.16

2RDH8 Support Rail, Steel, .625 In D, 48 In

Спецификация:

Item: Linear Shaft Support Rail

Type: Low, Pre-Drilled

Shaft Dia.: 0.625"

Mounting Hole from Shaft End: 2"

Mounting Hole Center to Center: 4

Mounting Hole Size: 0.193

Bolt Size: #8-32

Length: 48"

Base Width (In.): 0.450

Material: Steel

For Use With: Thomson 60Case shafting And Linear Bearings

Артикул Каталог	Описание	Производитель № модели
Дополнительные аксессуары:
2LEV7 Grainger	Super Ball Bushing, Open, Bore Dia 0.625 In, Inside Dia Tolerance +/- .001, Outside Dia 1.125 In, Required Housing Bore Dia 1.125 In, Slot Width 0.370 In, Slot Angle (Degrees) 15, Retention Hole Dia 0.110 In, Retention Hole Location 0.130 In, Between Grooves 1.105 In, Length 1.500 In, Dynamic Load Capacity 320 Lb, Temp Range 0 - 185 F, Delrin Material, For Use With Thomson Shafting	THOMSON SUPER10OPN
2LEX7 Grainger	Ball Bushing, Open, Bore Dia 0.625 In, Inside Dia Tolerance +/- .001, Outside Dia 1.125 In, Required Housing Bore Dia 1.125 In, Slot Width 0.340 In, Slot Angle (Degrees) 30, Retention Hole Dia 0.110 In, Retention Hole Location 0.130 In, Between Grooves 1.125 In, Length 1.500 In, Dynamic Load Capacity 620 Lb, Temp Range 0 - 185 F, Delrin Material, For Use With Thomson Shafting	THOMSON SSU10OPN

Обратите внимание:

2HWW7
Shaft, Carbon Steel, 1.500 In D, 18 In

3DWT8
Shaft, 1566 Steel, 1.500 In D, 30 In

3FUD7
Shaft, Steel, 0.500 In D, 36.00 In

3HVE4
Spline Shaft, Carbon Steel, 10 mm, 600 mm