2PTZ2 71343
NIAGARA CUTTER
End Mill, Roughing, Co, 2 In, 8 FL, Sq End
End Mill, Roughing, Coarse Pitch, General Purpose, Number of Flutes 8, Single End, Square End Style, Non-Center Cutting Type, Right Hand Cut, Cobalt Steel, Bright Finish, Dia 2 In, Shank Dia 2 In, Length of Cut 4 In, Overall Length 7 3/4 In, Rhc 30 Deg, Rhh 30 Deg, Good For Alloy, Carbon And Tool Steel, Aluminum, Cast Iron, Stainless Steel And Steel Hardened Up To 35 HrC
Артикул:
2PNC6
Каталог:
Grainger
Производитель:
OSG
Номер модели:
4920900
Страна производства:
Japan
Вес (кг):
2.61
Спецификация:
Item: Cobalt End Mill |
Grade: General Purpose |
List Number: 490 |
Type: Roughing, Coarse Pitch |
End Style: Square |
End: Single |
Dimension Type: Fractional Inch |
Diameter: 2" |
Shank Dia.: 2" |
Length of Cut: 4" |
Overall Length: 7-3/4" |
Number of Flutes: 8 |
Cutting Type: Non-Center |
Cutting Direction: Right Hand |
Helix Angle: 30 Degrees |
Corner Radius: 0 |
Finish: Bright |
Application: For Alloy, Carbon, Tool Steel, Aluminum, Cast Iron, Stainless Steel and Steel Hardened Up To 35 HrC |
Альтернативная продукция:
End Mill, Roughing, Coarse Pitch, General Purpose, Number of Flutes 8, Single End, Square End Style, Non-Center Cutting Type, Right Hand Cut, Cobalt Steel, Uncoated Finish, Dia 2 In, Shank Dia 2 In, Length of Cut 4 In, Overall Length 7 3/4 In, Rhc 10 Deg, Rhh 30 Deg, For Profiling And Slotting In Most Materials
End Mill, Roughing, Coarse Pitch, General Purpose, Number of Flutes 8, Single End, Square End Style, Non-Center Cutting Type, Right Hand Cut, Cobalt Steel, TiN Finish, Dia 2 In, Shank Dia 2 In, Length of Cut 4 In, Overall Length 7 3/4 In, Rhc 10 Deg, Rhh 30 Deg, For Profiling And Slotting In Most Materials
End Mill, Roughing, Coarse Pitch, General Purpose, Number of Flutes 8, Single End, Square End Style, Non-Center Cutting Type, Right Hand Cut, Cobalt Steel, Bright Finish, Dia 2 In, Shank Dia 2 In, Length of Cut 4 In, Overall Length 7 3/4 In, Rhc 30 Deg, Rhh 30 Deg, For Tough Alloys, Titanium, Stainless Steel , Iconel And Nickel Base Alloy
End Mill, Roughing, Coarse Pitch, General Purpose, Number of Flutes 8, Single End, Square End Style, Non-Center Cutting Type, Right Hand Cut, Cobalt Steel, TiCN Finish, Dia 2 In, Shank Dia 2 In, Length of Cut 4 In, Overall Length 7 3/4 In, Rhc 30 Deg, Rhh 30 Deg, For Tough Alloys, Titanium, Stainless Steel , Iconel And Nickel Base Alloy
End Mill, Roughing, Coarse Pitch, General Purpose, Number of Flutes 8, Single End, Square End Style, Non-Center Cutting Type, Right Hand Cut, Cobalt Steel, TiAlN Finish, Dia 2 In, Shank Dia 2 In, Length of Cut 4 In, Overall Length 7 3/4 In, Rhc 30 Deg, Rhh 30 Deg, For Tough Alloys, Titanium, Stainless Steel , Iconel And Nickel Base Alloy