ИНДУСТРИАЛЬНЫЙ КАТАЛОГ

Mill/Drill, 14 In, 3/4HP, 110V, 115-2600 Sp

Mill/Drill Machine, Swing 14 In, Motor HP 3/4, Voltage 110, Spindle Taper R8, Spindle Speeds 115-2600, Spindle Travel 3 1/2 In, Spindle to Table 14 In, 9/16 T-Slots, Capacity 1 In Drill, 1/2 In End Mill, 2 1/2 In Face Mill, Includes 1/2 In Chuck, 2 1/2 In Face Mill Cutter W/Arbors, R8/MT3 Arbor Adaptor, Work Light, 6 Piece R8 Collet Set 1/8 To 3/4 X 8ths

Артикул:

2LKP8

Каталог:

Grainger

Производитель:

DAYTON

Номер модели:

2LKP8

Страна производства:

China

Вес (кг):

198.18

2LKP8 Mill/Drill, 14 In, 3/4HP, 110V, 115-2600 Sp

Спецификация:

Item: Mill/Drill Machine

Swing: 16"

Motor HP: 3/4

Phase: 1

Voltage: 115/230

Hz: 60

RPM: 115 to 2580

Spindle: R8

Spindle Speed: 115 to 2580

Spindle Travel: 3-1/4"

Spindle to Table: 14"

Column Dia.: 3-5/8"

Quill Dia.: 2-1/2"

Table Work Surface: 7-1/2 x 23"

T-Slots: (4) 1/2

Capacity: 1" Drill, 1/2" End Mill, 2 1/2" Face Mill

Features: Fine Feed Handwheel With .001 Graduations With Quill Lock, Cast Iron Construction, Taper Roller Spindle Bearings, Depth Gauge, Precision Ground Work Table, Zero Setting Handwheel Dials With .001 Graduations

Includes: 1/2" Chuck, 2 1/2" Face Mill Cutter W/Arbors, R8/MT3 Arbor Adaptor, Work Light, 6 Piece R8 Collet Set 1/8 To 3/4 X 8ths, Way Covers

Артикул Каталог	Описание	Производитель № модели
Дополнительные аксессуары:
1A522 Grainger	Jobber Drill Set, Standard, List Number 1899, Number of Pieces 115, General Purpose Grade, High Speed Steel, Black Oxide Finish, Conventional Point, Drill Point (Deg.) 118, Fractional Size (In.) 1/16 To 1/2 By 64ths, Wire Size #1 to #60, Letter Size A To Z, Metric Size -, Decimal Equivalent -, Flute Length (mm) -, Overall Length (In.) -, Overall Length (mm) -, Shank Dia. (In.) -, Shank Dia. (mm) -, For Carbon Steel And Cast Iron, Meets/Exceeds -	CLE-LINE C21127
1NK11 Grainger	Drill Bit Set, Size 1/16 to 1/2 Inches, 29 Pieces, Pilot Point	DEWALT DW1969
1UG92 Grainger	Drill Bit Set, Size 1/16 to 1/2 Inch, 16 Piece Pilot Point	DEWALT DW1956
2LKR3 Grainger	Steel Floor Stand, For Use With Dayton Mill/Drill Machines, Steel, Height 31 In., Length 29 7/8 In., Width 22 In., Includes All Hardware To Mount Dayton Mill/Drill Machine	DAYTON 2LKR3
2LKR4 Grainger	Table Powerfeed, For Use With Dayton Mill/Drill Machines, Works On Longitudinal Axis Only, Forward/Reverse, 125 In/Lbs Torque, Variable Speed Control 1 To 9 In Per Minute, Rapid Movement Switch, 110 Volt Single Phase, Height 7 In., Length 12 In., Width 10 In.	DAYTON 2LKR4

Альтернативная продукция:

2LKP9 - Mill/Drill, 16 In, 1.5HP, 230V, 150-3000 Sp Подробнее...

2LKP9 2LKP9
DAYTON

Mill/Drill Machine, Swing 16 In, Motor HP 1.5, Voltage 230, 11.5 Amps, Spindle Taper R8, Spindle Speeds 150-3000, Spindle Travel 5 In, Spindle to Table 17 In, 5/8 T-Slots, Capacity 1 1/4 In Drill, 3/4 In End Mill, 3 In Face Mill, Includes 1/2 In Chuck, 2 1/2 In Face Mill Cutter W/Arbors, R8/MT3 Arbor Adaptor, Work Light, 6 Piece R8 Collet Set 1/8 To 3/4 X 8ths

5MYT6 - CNC Gear Head Mill/Drill, 14 In, 1Hp, 115v Подробнее...

5MYT6 BF20CNC
OPTIMUM

CNC Gear Head Mill/Drill, Motor HP 1, 1 Phase, 115, 60 Hz, 6 Amps, 1750 RPM, Spindle Taper 2MT, Spindle Speed (RPM )90-3000, Spindle Travel (In.) 2", Spindle to Table (In.) 13-3/16", 1/2" T-Slots, 5/8" Capacity, Features Brushless DC Motor, Variable Speed Inverter, Head Tilts Left and Right, Box Column with Dovetails Ways, Runs Manual or Automatic, Includes Safety Chuck Guard, Way Cover, Halogen Work Light, Step Motors, Ball Screws, Controller and Mach3 Software