2LHU1
Potentiometer, 0 up to 24VDC Output, 4X
Speed Control, 90/180 VDC Output, 10.0 A
Shunt Wound Volts -, 1 @ 90VDC, 2 @ 180VDC HP, Voltage Output 90/180VDC, Input Voltage 120/240VAC, NEMA 4X Enclosure, Speed Range -, Speed Regulation +/-1 RPM of Set Speed, Current/Torque Limit -, Accepts Tach Feedback Yes, Max. Amps 10, Dynamic Braking -, Linear Acceleration Adjustable 0 to 30 Sec., Linear Deceleration Adjustable 0 to 30 Sec., Fixed Deceleration (Sec.) 0 to 30, Rotation -, Power On Light -, Display Type LED, Protection Type Fused, IR Compensation Closed-Loop
Артикул:
2LHU2
Каталог:
Grainger
Производитель:
DART CONTROLS
Номер модели:
MD3E
Страна производства:
USA
Вес (кг):
1.04
Спецификация:
| Item: Control, DC Speed |
| Type: Electronic |
| HP: 1 @ 90VDC, 2 @ 180VDC |
| Voltage Output: 90/180VDC |
| Input Voltage: 120/240VAC |
| Enclosure: NEMA 4X |
| Speed Regulation: +/-1 RPM of Set Speed |
| Accepts Tach Feedback: Yes |
| Max. Amps: 10 |
| Linear Acceleration: Adjustable 0 to 30 Sec. |
| Linear Deceleration: Adjustable 0 to 30 Sec. |
| Acceleration Adjust (Sec.): 0 to 30 |
| Fixed Deceleration (Sec.): 0 to 30 |
| Display Type: LED |
| Protection Type: Fused |
| IR Compensation: Closed-Loop |
| Follower Circuit: Yes |
| Mount Type: Wall |
| Height (In.): 7.4 |
| Depth (In.): 4 |
| Width (In.): 5.53 |
| Operates On: 50/60 Hz |
| Provides: Adjustable Motor Speed with Digital Display |
| Operating Temp.: -10 to 45 Degree C |
| HP @ Higher Volts: 1/4 to 2 |
| HP @ Lower Volts: 1/8 to 1 |
| For Use With: Conveyor Ovens Used in Food Preparation, UV Curing, Heat Shrink Packaging, Industrial Auger and Mixing Equipment, Medical Lab Mixing Equipment, Spray Equipment, Printing Processes, Pumping Systems and Anywhere Accuracy and Closed Loop are Needed with a DC Motor |
| Includes: On/Off Switch, Digital Display and NPN Open Collector Transistor to Accept Tach Feedback |
| Agency Compliance: cULus Recognized (E78180) |
| Необходимая продукция: | ||||
Артикул Каталог |
Наименование |
Описание | Производитель № модели |
|
|---|---|---|---|---|
| 5JJ65 Grainger |
 |
Pulse Generator, Provides Current Sinking Square-wave Pulses with Frequency Proportional to Shaft RPM of Unit to Which It is Mounted, Pick-up Mounts with a #10-32 Screw Directly to Motor Shaft Being Monitored, 10 Pulses per Revolution, Input Voltage 4.5 to 24 VDC, Max RPM 5000, Output Cable Length 6 Ft, 3 Wire 18 AWG, Stainless Steel Ball Bearings, Operating Temp -10 to 45 Degrees F, Molded Santoprene Rubber Housing | DART CONTROLS PU-20E |
|
