12Z239 21456
LOCTITE
Low Strength Thread Sealant, 50 mL
Low Strength Thread Sealant, Anaerobic, 50 mL, White, Temp. Range -65 to 300 Degrees F, Specific Gravity 1.25, Viscosity 17, 000/50, 000 Thixotropic, Flash Point Greater Than 212 Degrees F, Full Cure 24 hrs., Application Time Unprimed: 6 to 24 hrs.; Primed: 1 to 3 hrs., Substrates Use On Coarse Metal Threads, High Viscosity, Low Strength, Anaerobic Thread Sealant, Resists Pressures To 10, 000 PSI, Lock And Seal Metal Pipes And Fittings To Prevent Loosening And Leakage From Shock And Vibration.
Артикул:
12Z238
Каталог:
Grainger
Производитель:
LOCTITE
Номер модели:
21454
Страна производства:
USA
Вес (кг):
1.59
Спецификация:
Item: Low Strength Thread Sealant |
Type: Anaerobic |
Size: 50 mL |
Color: White |
Temp. Range: -65 to 300 Degrees F |
Specific Gravity: 1.25 |
Viscosity: 17,000/50,000 Thixotropic |
Flash Point: Greater Than 212 Degrees F |
Full Cure: 24 hrs. |
Application Time: Unprimed: 6 to 24 hrs.; Primed: 1 to 3 hrs. |
Substrates: Use On Coarse Metal Threads |
Characteristics: High Viscosity, Low Strength, Anaerobic Thread Sealant,Resists Pressures To 10,000 PSI |
Application: Lock And Seal Metal Pipes And Fittings To Prevent Loosening And Leakage From Shock And Vibration. |
Дополнительные аксессуары: | ||||
Артикул Каталог |
Наименование |
Описание | Производитель № модели |
|
---|---|---|---|---|
12Z237 Grainger |
Adhesive Promoting Primer, Solvent, Resin Type Polyurethane, VOC Content 680 g/L, Size 15 oz., Color Clear, Coverage 200 sq. ft./gal., Dry Time 30 sec., Dry Time Recoat 8 hr., Dry Time Tack Free 5 sec., Application Temperature Up to 80 Degrees F, Application Method Brush, Surface Polyolefin, Polypropylene, PTFE, Thermoplastic Rubber SubstratesSemi-GlossInstant AdhesivesStandards CFIA Approved | LOCTITE 18397 |
Альтернативная продукция:
Medium Strength Thread Sealant, Anaerobic, 50 mL, Yellow, Temp. Range -65 to 300 Degrees F, Specific Gravity 1.09, Viscosity Paste, Flash Point Greater Than 212 Degrees F, Full Cure 24 hrs., Application Time Unprimed: 30 mins to 6 hrs.; Primed: 1 to 3 hrs., Substrates Use On Coarse Metal Threads, High Viscosity, Medium Strength, Anaerobic Thread Sealant. Particularly Suitable For Use On Stainless Steel Without Surface Activator. Resists Pressures To 10, 000 PSI